So, what's inside the EuroLine 6642M DVD-player? It seems to be a bit "newer" hardware in the 6642M compared to the 6620/6650 /6632/6652.
All these pictures are from my own EuroLine 6642M, so yours may not look exactly the same inside.
The PCB that hosts all the IC's in the 6642M looks like this:
PCB of my EuroLine 6642M. |
Here is a list of components and their function on the board above:
IC | Function |
---|---|
MediaTek MT1369AE | DVD-Player Servo/Decoder/µP chip |
AVS Technology AV3168 | NTSC/PAL Video encoder |
MediaTek MT1336E | DVD-Player RF Amplifier chip |
2 x Hynix 57V161610DTC-7 | RAM memory of some sort |
SST 39VF080 | 8Mbit (1M x 8) Flash memory |
ROHM BA5954FP | CD/DVD-ROM Motor/Actuator Driver |
Cirrus Logic CS4340-KS | 24-Bit, 96-KHz Stereo D/A Converter for Audio |
ST C4558 | Wide Bandwidth Bipolar Operational Amplifiers |
ON 14066B | Quad Analog Switch / Quad Multiplexer |
Atmel 24C02N | 256x8 Serial EEPROM |
If anyone has the datasheets for the MediaTek, Hynix or the ROHM BA5954FP circuits, it would be great if you could send them to me.
The DVD-drive is not a standard IDE DVD-drive as it is in many DVD players. It seems to be a little different from the ones in the 6620/6650 / 6632/6652 players.
The DVD-drive with the tray closed. |
If you remove the lid on top of the DVD-drive, there seems to be very few IC's in the drive itself. So all the IC's needed to control the drive is located on the big IC board.
Here is a closer look at the DVD with the metal lid removed and the tray open. |
Not much to say, it's a power supply with all the things that a power supply usually have:
The PS in my EuroLine 6642M. To the right you can see the small upside-down PCB that holds the circuits for the phones output. |
There is also a small PCB that contains the SCART-socket.
The SCART has stereo audio output and a choice of RGB or Composite video output (RGB or composite is chosen in the setup menu of the player). |
If anyone has any more information about the hardware in the EuroLine 6642M, or can tell me if I have made any errors on this page, please contact me.