PCB for ButtonBox2
When you use the PCB to build a ButtonBox2, it will look like this when it's ready:
As you can see, there is a lot of empty space on the card :-). |
These are the things you have to mount on the PCB to get a working ButtonBox2:
Part number | Item |
---|---|
U1 | 74HC4066, Quad bilateral switch |
U2 | Atmel AT90S8515 CPU |
X1 | 4.0 MHz crystal |
LED1 | LED |
JP1, JP2 | IDC connectors |
PC, KBD | 6-pin mini-DIN connectors (female) |
C1, C2, C3, C4, C5 | Capacitors |
R1, R2, R3, R4, R5, R6 | Resistors |